Let StarCraft PureCOAT transform your projects. PureCOAT is a water based clear coat that comes in Glossy, Satin, and Matte finishes! PureCOAT is the easiest and safest way to apply a clear coat to a variety of items such as glass, plastic, metal, ceramic, wood, fabric, and paper. This Product is excellent for use on Glitter Tumblers and to seal StarCraft Chalk & Mineral Paints.
Self Leveling
Scratch Resistant
How to apply PureCoat
Prep the surface that is being used, by removing any of the surface impurities.
When sanding, wearing a mask is recommended.
To apply you can brush, spray or pour the PureCOAT directly onto the surface. A thin layer is all that is needed. When applying the PurCOAT be sure that there are no dribs or run-offs of the product. The room temperature should be between 65-75℉.
It will take one to five coats of PureCOAT when using PureCoat as a sealer. Expect to apply up to 15 or more thin coats when building the PureCoat up for a smooth finish glitter tumbler. Dry time is 30 minutes to one hour. Before recoating our recommendation is to wait two-four hours. If needed you can apply more layers. Final layers when building multiple coats may take on a “orange peel” texture. This is normal when applying over glittered surfaces due to the bumpy texture of the glitter. If your PurCoat takes on the “orange peel” texture, once fully dry, sand until smooth and apply additional coat(s) of PureCoat.
Important Suggestions:
Dry time is 30 minutes to one hour
One to two hours until dry to the touch
Wait two to four hours in between applications
Product is not dishwasher safe
Do not drop, rough handle, scratch or gauge dried/cured product
DO NOT SHAKE as it will cause the product to have bubbles
Sanding (while wearing a mask) may be needed in between coats to allow even coating
Both Matte and Satin PureCoat require Glossy PureCoat as a base
Contact Us
